2B cosplay guide: dress, wig, visor and swords from NieR:Automata

Published: · Updated: · Equipo OtakuOshi

Three things decide whether a 2B cosplay works: the short white wig, the black visor across the eyes and the outline of that dress, short skirt and tall boots included. People clock those from the far end of the hall. Nail them and you can cut corners elsewhere. Miss them and the most faithful hem embroidery in the country won’t rescue you. Below you’ll find each piece in turn, what’s worth buying, what’s worth making, and what to sort out before you spend a full con day in heels with your eyes covered.

NieR:Automata arrived in 2017, directed by Yoko Taro, developed by PlatinumGames and published by Square Enix, with Akihiko Yoshida on character design. The best part of a decade on, 2B still turns up at almost every event, and the anime NieR:Automata Ver1.1a, broadcast across 2023 and 2024, introduced her to fans who have never played the game. So a NieR Automata cosplay goes down as well at an anime con as at a gaming expo.

2B cosplay: what makes her instantly recognisable

YoRHa No.2 Type B, to give her the full designation, is dressed in black almost from head to toe. Run through the checklist before you order anything, so you know what’s already in your wardrobe:

  • Short black dress with a high collar, puffed sleeves, a chest cut-out covered by sheer lace-patterned fabric, an open back and a white pattern around the hem.
  • White leotard underneath. It flashes when you move and is what remains in the skirtless version.
  • Short black gloves. The white point over the back of the hand belongs to the sleeve lining, not the glove.
  • Black hold-ups with a decorated top and heeled over-the-knee boots.
  • Short white wig with a side-swept fringe, plus a black hairband.
  • Black visor, the blindfold over her eyes.
  • Beauty spot below the left corner of her mouth (her left, so the right-hand side as you look at her), dotted on with brown eyeliner.
  • Two swords across the back, a white katana and a greatsword.

The dress: velvet, sleeves and the hem pattern

Black stretch velvet is the closest match to the original. It drinks in light and hides creases in photos. Satin is too shiny under flash and shows every seam, so keep it for trims. The sleeves finish mid-forearm in black feathers, and a length of feather trim stitched on by hand survives the whole day. Smooth, pointed cockerel or goose feathers sit closer to the design than marabou, which is fluffy down and looks like a feather boa. Glue-gunned feathers work loose with friction and have gaps by mid-afternoon.

The white pattern on the skirt hem is the part that puts people off, yet it has the most shortcuts. In rising order of effort: stretch iron-on vinyl cut from a template, white fabric paint through a stencil, or white lace trim sewn on top. Test the vinyl on an offcut first, as heat flattens the velvet pile and leaves a mark. If it does, cut the hem band from a plain black fabric and keep the velvet for the bodice. Hand embroidery looks wonderful, but it only earns its hours if you’re entering a masquerade where judges check the workmanship at close range.

Buying the costume ready-made is the usual route for a first 2B cosplay, and three cheap tweaks lift it straight away: swap the sleeve feathers, steam the creases out of the hem from the wrong side (a hot iron crushes velvet and can melt a printed pattern) and take the waist in with a couple of darts. Ask the seller for actual garment measurements, not just the size on the label, as sizing is all over the place between shops. Many bought sets come with plain black elbow-length gloves, which isn’t what the original design has, so compare them with a screenshot from the game before you settle for them.

The skirtless version

In the game, 2B loses her skirt when she self-destructs, which leaves the white leotard on show. It’s a favourite for photoshoots, but check the event’s dress code before wearing it on the day, since plenty of UK cons expect a minimum of coverage in family areas. Skin-tone tights and a properly lined leotard help, but they don’t override the event’s rules, so keep the skirt in your bag in case staff ask you to put it on.

2B wig, visor and make-up

The wig is a short bob in white with a touch of silver-grey, cut to the jaw with the fringe falling to one side. Steer clear of pure white, which bleaches out in photos and looks plasticky. Choose heat-resistant fibre, pin it to a wig head and trim the fringe a few millimetres at a time, with thinning scissors if you own a pair. The black hairband sits behind the fringe and is easily made from a strip of dress fabric over a slim plastic band.

Adult cosplayer trimming a short white wig on a wig head, with clips, wig spray and black satin ribbon on the desk

Making a visor you can actually see through

The visor is where most of the grief comes from, because a solid blindfold leaves you walking blind. The answer is fabric that reads as black from outside and lets light in from behind:

  • Black chiffon or georgette, single or double layer. The comfiest choice and the coolest to wear.
  • Tulle or fine mesh, slightly stiffer, so it keeps its shape.
  • Opaque fabric with a mesh window over the eyes, for a deeper black on camera.

Stitch it to thin elastic or fasten it with Velcro at the back, under the wig. Darken the skin around your eyes with matt black eyeshadow so it doesn’t show through the fabric in flash photos. Try it at home in dim light, because that’s what many exhibition halls are like. One rule to stick to: visor off for stairs, escalators, road crossings and packed aisles. It goes back on for photos in a couple of seconds.

Make-up

2B has pale skin, soft pink lips and the beauty spot beside her mouth. As her eyes are hidden most of the time, an even base, light contouring and setting spray will do. If any of those products is new to you, patch test it on a small area of skin 24 hours beforehand. For shots without the visor, her eyes are a grey-blue. Please don’t try coloured contact lenses for the first time on con day. In the UK even zero-powered cosmetic lenses must be supplied under the supervision of a registered optician, so get fitted properly, buy from a legitimate supplier and never share a pair.

Boots, hold-ups and gloves

The heeled thigh boots cost nearly as much as the dress and are the item your feet will remember. There are two ways to go. Buy over-the-knee boots with a 6 to 8 cm block heel, which is far steadier than a stiletto. Or, for less money, make stretch faux-leather boot covers that pull on over comfortable ankle boots you already own. Cut well, they pass for full boots in photos.

Pack gel insoles and a pair of flats for breaks. The hold-ups have a decorated band at the thigh, which lace-top ones imitate nicely. 2B’s gloves are black and short. What you see below the feathers is the white sleeve lining, which fits closely down the forearm and ends in a point over the back of the hand, so there’s no need for the glove to run up the arm. The easiest build is a pair of black lycra gloves with that white point sewn inside the sleeve, or onto the glove itself if you’d like it all to come off in one go. Check the lycra doesn’t turn see-through when you make a fist.

2B’s swords and Pod 042

2B carries two weapons on her back: Virtuous Contract, a white single-edged sword that everybody calls a katana, and Virtuous Treaty, a greatsword in matching style. If you only have time for one, build the katana. At full scale it’s nearly 1.4 m long (the official 1:1 replica is about 139 cm), but most cosplay versions come in at 100 to 110 cm, which is easier to live with in a packed hall. In EVA foam it weighs next to nothing and travels well in a telescopic drawing tube. The greatsword is a good deal longer and wider, and at true scale it’s close to your own height. Before you build it, check whether your event sets a maximum prop length, as each one has its own.

  • Core: a slim PVC pipe or fibreglass rod running along the blade to stop it drooping, ending about 5 cm short of the tip so the end is foam only. If you choose fibreglass, cut it wearing gloves and a mask, because it sheds very fine splinters.
  • Blade and guard: high-density EVA foam in 5 mm sheets glued to both sides of the core, with details in 2 mm, sanded to a bevel and sealed with two or three coats of flexible primer before paint. Watered-down PVA is fine on rigid parts, but it ends up cracking on a blade that flexes.
  • Paint: off-white for the blade and grip, the fittings in whatever shade your reference shows, and a matt varnish on top.
  • Mounting: neodymium magnets set into the blade with matching ones in a harness that sits below the back cut-out, so it stays hidden. For less faff, use a plain black harness with visible clips. Handle the magnets with care, as they pinch hard, and keep them away from bank cards and anyone with a pacemaker.
Adult cosplayer sanding and painting a long EVA foam sword on a cutting mat, with a heat gun and brushes to hand

Work on EVA foam with a window open. Contact adhesive and heat guns give off fumes, and sanding throws up dust. An FFP2 mask is enough for sanding. For contact adhesive and spray paint you need a respirator with organic vapour filters, because a dust mask won’t stop fumes. A heat gun burns even with no flame, so rest it on a heatproof surface, and always cut with the craft knife moving away from your hand. If you’d rather commission the swords, the prop makers section of OtakuOshi features creators who document their builds and take orders.

Pod 042, the little robot hovering at 2B’s side, is optional, but few things get you stopped for photos more often. Build it from EVA foam or 3D print it, then mount it at shoulder height on a clear acrylic rod fixed to the harness. Round off the end of the rod and don’t let the Pod stick out more than a hand’s width, because it sits at face height for anyone passing.

Prop rules at UK conventions

Nearly every event has a prop check at the entrance. Foam, card, plastic and light wood are normally accepted, while metal, sharp edges and hard points are refused, and some shows set a maximum length that matters for the greatsword. Read the weapons policy on the event’s own website before you travel. Remember, too, that carrying a realistic imitation weapon in public can get you stopped, so keep the swords bagged on the street and on public transport, and only unwrap them inside the venue.

NieR Automata cosplay: 9S, A2 and other group ideas

Going with friends? NieR:Automata gives you a striking group on a tiny palette, nearly all black and white.

9S

YoRHa No.9 Type S is 2B’s obvious partner and a kind first project: buttoned black jacket, shorts, knee socks, boots, gloves, short white wig and the same visor. His weapon is Cruel Oath, a black Eastern-style sword that pairs with 2B’s white katana, and he has Pod 153 in tow. Most of it can be adapted from high-street clothes.

A2

YoRHa Type A No.2 has long white hair (she cuts it short later in the story, so decide which version you’re doing), no visor and a minimal black outfit, with her body marked as though the android’s skin has worn through. A painted skin-tone mesh bodysuit gives that effect, and it’s comfier and more durable than body paint. If you do paint your skin, use cosmetic-grade products and patch test beforehand.

More characters to fill out the group

  • Commander White, in a high-collared white dress with gold trim, tall white boots and her blonde hair in a ponytail. A great contrast with all the black.
  • Operators 6O and 21O, veiled across the mouth in place of a visor. Comfortable and seldom done.
  • Devola and Popola, the red-haired twins, ideal for a pair of mates.
  • Emil, whose spherical head can be built from a hollow polystyrene sphere or a covered globe. Put the vision panel in the mouth with black mesh and leave ventilation gaps, because it’s hot in there and you won’t see much.
  • Adam and Eve, for anyone who’d sooner play the villains.

Still choosing characters? Our list of cosplay ideas for women and men has options at every level.

Tips for wearing 2B at a con

  • Do a full dress rehearsal at home for at least an hour, boots, visor and swords included. You’ll soon learn what rubs and what falls off.
  • Carry a repair kit: safety pins, needle and black thread, double-sided tape, superglue and hair grips.
  • Bring a friend if possible. Someone to steer you while the visor’s on and hold your swords makes the day far easier.
  • Ask before photos, and expect to be asked. Cosplay is not consent. Nobody may touch you or photograph you in ways you’re not happy with, whatever you’re wearing. If someone oversteps, tell the event staff.
  • Keep drinking water. Velvet, a wig and long gloves get seriously warm in a full hall.

If this is your first con, our guide to what cosplay is covers the basic etiquette.

FAQs

Is a 2B cosplay difficult for a beginner?

Moderately. The dress can be bought ready-made and improved with small alterations, the wig is short and simple to style, and the visor takes an afternoon to sew. Boots and swords are the hard bits, and both can be simplified with boot covers and a single EVA foam katana.

How much does a 2B cosplay cost?

That depends on how much you make yourself. As a rough guide, a ready-made dress set from online cosplay shops tends to cost £40 to £80, a decent wig £15 to £25 and the boots £35 to £70. Home-made EVA foam swords come to about £20 to £25 in materials. Check current prices before you commit, as they vary a lot with the seller and the postage.

How do you see through 2B’s visor?

Make it from black chiffon, georgette or mesh, not solid fabric. It looks black from the front while you can still make out shapes and light from behind. Take it off near stairs and crowds all the same.

What wig do I need for 2B?

A jaw-length bob in silver-white or very pale grey with a side-swept fringe, in heat-resistant fibre. Pure white looks artificial under flash.

Can I take 2B’s swords to a convention?

Yes, if they’re foam, card, plastic or light wood and within the event’s size limits. Metal and sharp edges are banned at practically every UK con.

Which NieR:Automata character is easier than 2B?

9S, since the jacket, shorts and boots can be adapted from ordinary clothes and he shares the short white wig and visor. The Operators are simple and very comfortable too.

Share your NieR:Automata cosplay on OtakuOshi

Whether your 2B is finished or half built, OtakuOshi is a good home for the process: wig tests, the hem before and after, the katana mid-paint and the final photos. You can open a free account at otakuoshi.com, follow cosplayers working on NieR:Automata and support the people who share tutorials and making-of posts. Post what went wrong as well: the hem you had to redo helps a beginner more than the final photo.

Sign up to our newsletter

We'll email you whenever we publish something new.

This content has been reviewed by the human editorial team of Polaris Nexus LLC.

Leave a comment